Part I. Introduction of TR-069 TR-069 (Technical Report-069) is a communication protocol developed on CWMP (CPE WAN Management Protocol) and the communication link between CPE (Customer Premise Equipment) and ACS (Auto-Configuration Server). With the protocol, CPE can achieve indispensable measures of initialization and operation such as service provision, function setting, the upload and download of files, system detection, etc. Part II. Features of TR-069 Protocol ✔ Automatic configuration of user equipment and dynamic service configuration For ACS, each user’s equipment can mark its model, version, and other info in the protocol. According to

The wired access technology develops from digital subscribe line (xDSL) to optical access (PON, Ethernet Optical Access) now. Optical access is occupying the market of broadband access. Why? What’s the difference between ADSL, VDSL and fiber optic Internet? In this article, let’s explore xDSL and optical fiber access networks together!  Part I. What is ADSL, VDSL, and Fiber Optic Internet?  1. ADSL ADSL refers to the Asymmetric Digital Subscriber Line. It’s still a common type of broadband access, which works via standard cabling. The speed of ADSL is not reliable enough, which depends

In the market, most businesses like Huawei or ZTE offer CS-EMS to manage the OLT (Optical Line Terminal). V-SOL also has this software. However, in order to improve the efficiency and quality of management, V-SOL developed a brand-new system BS-EMS, which would bring operators a better experience and users a securer network. Now let’s start to learn more about BS-EMS! Part I. What is BS-EMS? BS-EMS refers to Element Management System integrated with BS (Browser/Server) architecture. There are five aspects that EMS makes a difference in, which include fault, configuration,

With the development of 5G/10G and Ultra High Definition Video, the demands for over 1GbE network interface are increasing. Although 10GbE has existed, it requires advanced technology and higher cost. At the moment, 2.5GbE which is between 1GbE and 10GbE is created. More and more devices support a 2.5GbE port. Besides, many laptops no longer provide Ethernet ports so people should use USB to RJ45 to have a 2.5GbE LAN port. Then, what is 2.5GbE exactly and what features can it bring? Below we will explain. Before that, let’s get to know

1. What’s the market prospect of 4G LTE CPE Router? Although the 5G network is the general trend, the 5G technology and base station construction are not mature enough in plenty of areas. According to the research, quite a few regions including India, Indonesia, Chile, etc. are using the 4G network. Some countries like Yemen have not started adopting 4G. Even some undeveloped regions are still using 2G. Therefore, 3G/4G networks are playing an important role at present. In the following years, the demand for high-quality and low-cost 4G routers

In the past, the campus network always adopts traditional cabling methods. With the development of new technology like AR/VR, 4k/8k videos, WiFi 6, etc., the network traffic shoots up and some problems of the network are exposed. For instance, there is no way to manage the network uniformly because there are lots of devices and fault points. It cost a lot to set up a sole network for each of the multiple systems. In this circumstance, POL is created to solve the problems. Part I. What is Passive Optical LAN

When you travel or go to some remote regions, you may be annoyed with the poor signal. Is there any way to get a strong WiFi router signal outdoor in a 4G LTE network? Greatly, the V-SOL outdoor 4G CPE router would be a good choice! Part I. What is the Outdoor 4G CPE Router? V-SOL outdoor 4G CPE router XYC1841 is different from a WiFi-only router, which needs to connect with the fiber-optic network. The 4G CPE WiFi router can receive the operator’s 4G LTE network signals and convert them into broadband and Wi-Fi. You only need to insert